Gebruiksaanwijzing

Protect

  1. Shake the bottle well before using it.
  2. Clean the surface that you want to protect and make sure it's dry.
  3. Test the product on a small, inconspicuous area to make sure it won't cause any damage.
  4. Spray the Protect on the surface, and use a brush to work it deep into the fibers.
  5. Wait ten minutes, and then apply the Protect again at least once.
  6. Wait another ten minutes, and then use a clean cloth to remove any remaining drops.
  7. Allow the surface to dry for at least 24 hours.

Store the product at room temperature. A 100-ml bottle of Protect can treat approximately 10 pairs of shoes.

Cleaning

  1. Shake the bottle well before using it.
  2. Test the product on a small, inconspicuous area to make sure it won't cause any damage.
  3. Dip the brush in warm water.
  4. Pump a small amount of cleaning solution onto the shoe and use the brush to make circular movements, effectively cleaning the surface.
  5. Dry the surface with a clean cloth. If necessary, repeat the steps.
  6. Leave the surface to dry for at least 24 hours.

Store the product at room temperature. A 70-ml bottle of Cleaning can treat approximately 10 pairs of shoes.

Refresher

  1. Shake the bottle well before using it.
  2. Test the product on a small, inconspicuous area of the shoes to make sure it won't cause any damage.
  3. For shoes, insert the Deodorizer nozzle into the shoe and spray 5 to 10 times. For fabrics, spray the entire surface from a distance of 10-15 cm.
  4. Apply the product to your shoes or other articles at least once a week, preferably immediately after using them.

Store the product at room temperature. A 100-ml bottle of Deodorizer can treat approximately 20 pairs of shoes.