How to use

Protect

  1. Shake the bottle well before using it.
  2. Clean the surface that you want to protect and make sure it's dry.
  3. Test the product on a small, inconspicuous area to make sure it won't cause any damage.
  4. Spray the Protect on the surface, and use a brush to work it deep into the fibers.
  5. Wait ten minutes, and then apply the Protect again at least once.
  6. Wait another ten minutes, and then use a clean cloth to remove any remaining drops.
  7. Allow the surface to dry for at least 24 hours.

Store the product at room temperature. A 100-ml bottle of Protect can treat approximately 10 pairs of shoes.

Cleaning

  1. Shake the bottle well before using it.
  2. Test the product on a small, inconspicuous area to make sure it won't cause any damage.
  3. Dip the brush in warm water.
  4. Pump a small amount of cleaning solution onto the shoe and use the brush to make circular movements, effectively cleaning the surface.
  5. Dry the surface with a clean cloth. If necessary, repeat the steps.
  6. Leave the surface to dry for at least 24 hours.

Store the product at room temperature. A 70-ml bottle of Cleaning can treat approximately 10 pairs of shoes.

Refresher

  1. Shake the bottle well before using it.
  2. Test the product on a small, inconspicuous area of the shoes to make sure it won't cause any damage.
  3. For shoes, insert the Deodorizer nozzle into the shoe and spray 5 to 10 times. For fabrics, spray the entire surface from a distance of 10-15 cm.
  4. Apply the product to your shoes or other articles at least once a week, preferably immediately after using them.

Store the product at room temperature. A 100-ml bottle of Deodorizer can treat approximately 20 pairs of shoes.